Sony MVS-8000 User Manual page 338

3
338
Key Setting Operations Using Menus
If you select [Normal], skip to step 7.
Set the border width and other parameters.
When border or outline is selected: The setting parameters depend on
the key type and whether the separate edge function is enabled or not.
To enable the separate edge function, press [Separate Edge], setting it
on.
• Separate edge off
Knob Parameter
1 Width
3 Density
a) In the "4H mode" and when [Fine Key] (page 340) is on, the setting value range is 0.00
to 4.00.
b) When a wipe pattern key or key wipe pattern key is selected as the key type
• Separate edge on
The left, right, top, and bottom border or outline widths can be adjusted
independently. The separate edge function is only valid when a
luminance key, linear key, or chroma key is selected as the key type.
Knob Parameter Adjustment
1 Top Top edge width
2 Left Left edge width
3 Right Right edge width
4 Bottom Bottom edge width
5 Density Density
a) In the "4H mode" and when [Fine Key] (page 340) is on, the setting value range is 0.00
to 4.00.
When drop border or shadow is selected: The setting parameter values
depend on the on/off setting of key drop and the selection of 4H mode/
8H mode (see page 52).
• "Key drop OFF" mode
Knob Parameter Adjustment
1 Width Width
2 Position Position
3 Density Density
Adjustment
Width
Density
Setting values
a)
0.00 to 8.00
b)
(0.00 to 100.00)
0.00 to 100.00
Setting values
a)
0.00 to 8.00
a)
0.00 to 8.00
a)
0.00 to 8.00
a)
0.00 to 8.00
0.00 to 100.00
Setting values
0.00 to 8.00
359.99 to 180.00
0.00 to 100.00