Sony MVS-8000 User Manual page 387

Applying modulation to the wipe pattern (Modulation)
You can apply modulation independently to the main pattern and sub pattern.
Use the following procedure.
Note
When using 1080PsF mode in an HD system, the modulation function is not
available.
1
In the M/E-1>Wipe menu, select HF5 'Main Modify.'
The Main Modify menu appears.
2
Depending on the desired effect, in the <Modulation> group select one of
the following.
H: Modulate the pattern, applying waviness in the horizontal direction to
edges.
V: Modulate the pattern, applying waviness in the vertical direction to
edges.
Fringe: Modulate the pattern, applying waviness in the radial direction to
edges.
3
Set the following parameters.
.
Knob
1
2
3
4
a) See page 65.
b) See page 65.
Applying barrel or pincushion distortion to the edge of the wipe
pattern (Spring)
You can set the spring function independently for the main and sub patterns.
Use the following procedure.
1
In the M/E-1 > Wipe menu, select HF5 'Main Modify.'
The Main Modify menu appears.
2
Press [Spring], turning it on.
Parameter Adjustment
Amplitude Amplitude of modulation
Frequency Frequency of modulation
Speed Speed of waves
Shape Form of the modulation
Setting values
0.00 to 100.00
0.00 to 100.00
–100.00 to +100.00
b)
1 to 3
Basic Procedure for Wipe Settings
a)
387