Sony MVS-8000 User Manual page 174

Recalling a user programmable DME: When recalling a user programmable
Signal format settings (Format)
Make the following settings.
Signal format
Specify the signal format to be handled by the devices.
The combinations of signal formats that can be selected are as follows.
System
HD system
SD system
Screen aspect ratio
Switch the screen aspect ratio to 4:3 or 16:9.
Changing the input reference signal in an HD system
This changes the input reference signal.
• Tri Sync: tri-level sync for an HD system
• BB (Black Burst): black burst or sync for an SD system
The following table shows the relation between signal format and the
frequency of a signal that can be used as the input reference signal.
174
Setup
The actual operation is linked between the top and bottom rows of the table
(e.g. M/E-3 and M/E-1), but the common setting values cannot be used
between the two screen aspect ratios. The edges of the screen, for example,
differ between 16:9 and 4:3.
For image operations in the device control block, first make the settings
separately on the different channels.
DME, select pattern numbers 1901 to 1949, or 2901 to 2949. The effects
for the 16:9 and 4:3 screen aspect ratios will be recalled linked together.
Field frequency
50
59.94
60
23.976
24
25
29.97
30
50
59.94
59.94
50
Effective number of scan lines
1080i
1080PsF
720p
480i
576i