Sony MVS-8000 User Manual page 100

• Lower left corner of image or monitor
The plus direction on the z-axis is depth
into the image or monitor screen.
Limits of three-dimensional parameters
The following table shows the limits of three-dimensional transformation
parameters.
The three-dimensional parameters of an image change when you use the
trackball or Z-ring to execute a transformation. You can also execute a
transformation by entering parameter values from the numeric keypad control
block.
Operation mode
Location XYZ
Rotation, Spin
Axis Location
Location Size
Aspect
Perspective (x, y)
Perspective (z)
Skew
100
Digital Multi Effects (DME)
When using SD format signals: x = −4.00, y = −2.25, z = 0.00
When using HD format signals: x = −16.00, y = −9.00, z = 0.00
x-axis
–4.00 (–16.00)
a)
z-axis –
Values for x-, y- and z-axes (16:9 mode)
y-axis
+2.25 (+9.00)
–2.25 (–9.00) a)
y-axis
a) The value in parentheses is for HD format.
Limits of three-dimensional transformation parameters
HD format: –999.9999 to +999.9999
SD format: –333.3333 to +333.3333
–999.9999 to +999.9999
HD format: –999.9999 to +999.9999
SD format: –333.3333 to +333.3333
0.0000 to +999.9999
0.0000 to +2.0000
Perspective
HD format: –999.9999 to +999.9999
SD format: –333.3333 to +333.3333
Perspective
HD format: 0.0000 to 333.3333
SD format: 0.0000 to 999.9999
HD format: –9.9999 to +9.9999
SD format: –3.3333 to +3.3333
z-axis +
a)
+4.00 (+16.00) a)
x-axis