Selecting An Input Image - Sony MVS-8000 User Manual

To the right of the button is shown the current frame memory output signal,
input signal, and processing background signal status.
<Out>: output signal status
<FG>: input signal status
<BG>: processing background signal status
d Enable status display
Off: Both Freeze Enable and Edit Enable are off.
Frz: Freeze Enable is on.
Edt: Edit Enable is on.
Rec: Record Enable is on (Frame Memory>Animation>Record menu only)
e Reposition/Lock status display
These appear for frame memory outputs (FM1 to FM8) when reposition (see
page 433) or lock (see page 433) is currently applied.
f Pair button
Press this button, turning it on, to enable pair mode.
g <Select> group
Select the output to which operations apply.

Selecting an Input Image

For the input image to frame memory, you can use either the signal selected on
one of the two frame memory source buses or a dedicated color matte signal.
When using the signal on frame memory source bus 1 or 2 for the input image,
select the signal as described below.
For the method of using a color matte signal, see "Freezing an image and
writing it to memory" (page 424).
422
Frame Memory Operations
Blk: when black signal is output
Thr: when input image is output
Frz: when a freeze is output
Fil: when still image file is output
Com: when image is processed
Rec: when continuously capturing images (record) (Frame
Memory>Animation>Record menu only)
FMS: frame memory source
Col: color matte signal
Blk: black signal
Stl: still image (freeze image or still image file)