Sony MVS-8000 User Manual page 183

• Through Mode: Enable or disable through mode. Through mode can be
enabled for AUX1 to 48 outputs, M/E and PGM/PST program outputs, and
clean output.
• Safe Title: Enable or disable safe title, and carry out settings for box 1 and 2
and cross.
• Ref. Output Phase: Set the reference output mode and phase adjustment.
• 4:3 Crop: Set the actual video image to be cropped to a 4:3 aspect ratio when
an HD system has a screen aspect ratio of 4:3.
Settings relating to video switching (Transition)
• Transition Preview: Specify the operation mode for transition preview for
each of the M/E and P/P banks.
• Key Transition: Specify the operation mode for independent key
transitions.
• Bus Toggle: Switch the bus toggle for each of the M/E and P/P banks on or
off.
• Split Fader: When the bus toggle is off, the split fader settings are enabled.
For each of the M/E and P/P banks, select enable or disable.
• Fade To Black: Enable or disable fade-to-black for each final program
output.
• Preset Color Mix: Set the stroke mode for a preset color mix, the key status
for a transition including a key, and the mode in which the transition type
after a transition ends returns to the previous setting.
• Transition Curve: Set the relationship when carrying out a transition,
between the fader lever position and the advancement state of the transition.
Key, wipe and frame memory settings (Key/Wipe/FM)
• Key Memory: Set the key memory operation mode for each of the M/E and
P/P banks.
• Video Proc Memory: Enable or disable video process memory.
• Show Key: Enable or disable show key for edit preview, M/E and P/P Pvw/
K-Pvw.
• DSK Auto Drop: Specify a DSK to be turned off automatically when a
cross-point button on the P/P program bus is pressed.
• Mask/Border Process: Set the processing order of masks and borders for
each M/E and P/P bank.
• Key Priority: Set the key priority operation mode for each of the M/E and
P/P banks. In DSK mode, the key priority is fixed.
• Xpt Hold mode: Set the operation mode for the cross-point hold button
provided on the key bus for each of the M/E and P/P banks.
• Pattern Limit Transition: Set the operation mode when the pattern limit is
released for each of the M/E and P/P banks.
• Wipe Edge Default: Adjust the wipe edge softness for each of the M/E and
P/P banks.
• FM Auto Store: Switch on or off the function to automatically attach a name
and save in frame memory.
183
Setup