Sony MVS-8000 User Manual page 331

4
Adjust the position and size of the sample selector, to specify the color to
be used as the basis of chroma keying (typically a blue background).
Knob
1
2
3
a) The setting ranges depend on the signal format, screen aspect ratio, and size settings.
5
Select [Auto Start] in the <Auto> group.
This executes an auto chroma key based on the color specified by the
sample selector, and displays the composite image on the monitor.
Making key active adjustments
When the key active function is on, the composite image is output to the
monitor, and you can watch the monitor while manually adjusting the keying.
When the key active function is off, only the foreground image appears. Set
this off when manually adjusting color cancel (see the next section).
Use the following procedure.
1
In the Chroma Adjust menu, set [Key Active] on.
2
Adjust the following parameters.
Knob
1
2
3
4
5
Making color cancel adjustments
If the background color is leaking into the foreground video, turning the color
cancel function on allows you to eliminate this leakage.
Use the following procedure.
1
In the Chroma Adjust menu, turn [Key Active] off.
Only the foreground image appears on the monitor.
Parameter Adjustment
Position H Horizontal position
Position V Vertical position
Size Size
Parameter Adjustment
Clip Chroma key reference level
Gain Key gain
Hue Hue
Density Density
Filter Filter coefficient
Setting values
–100.00 to +100.00
–100.00 to +100.00
1.00 to 100.00
Setting values
0.00 to 100.00
–100.00 to +100.00
359.99 to 0.00
0.00 to 100.00
1 to 9
Key Setting Operations Using Menus
a)
a)
331