Vol.1 Vol - Sony MVS-8000 User Manual

Functions Newly Supported in Version 5.00
The functions newly supported in the MVS-8000 system version 5.00 are as
follows.
Functions relating to switcher processor
Classification Functions supported
a) In an HD system, holds a maximum of 444 still
Frame memory
images
a) b) Enabling and disabling side flags (inserting a
Side flags
different image on both sides of a 4:3 image)
a) MVS-8000A system only
b) When using the MVE-9000/MVE-8000A through SDI interface, this function is partially limited.
Functions relating to DME
Classification Functions supported
a) Pattern 304 (round corners) added
Wipe crop
Pattern 304 (round corners) added
a)
Mask
Interpolation Mode3 (sharp) added to <Filter Mode> group
a) Only when using MVE-9000
Functions relating to external devices
Classification Functions supported
Control from external Enabling and disabling operation from System
devices Manager
Functions relating to setup
Classification Functions supported
Signal format
720p/50
Operation at startup Enabling and disabling a function for automatic
register loading after powering on
a)
Menu No. See page
Vol.1 Vol.2
2121 23, –
78
3213 89, –
460
Menu No. See page
Vol.1 Vol.2
4116, 4116.1 – 51
4127 – 76
4163 – 143
Menu No. See page
Vol.1 Vol.2
3211 459 –
Menu No. See page
Vol.1 Vol.2
7313, 7333 174 278
7314 176 282
3