Sony MVS-8000 User Manual page 444

1
2
3
4
5
To rename a directory
Select a directory in the list, and in the button area press [Rename].
In the keyboard window that appears, enter the new directory name, and press
[Enter]. The name of a directory is limited to eight characters.
444
External Hard Disk Drive Access
In the Frame Memory menu, select VF6 'External HDD' and HF2
'Backup/Restore.'
The Backup/Restore menu appears.
If in Dual Simul mode, select the switcher to operate (see page 442).
To get the hard disk drive information
Press [Refresh Status].
The Model Name item shows the product information for the hard disk
drive, and the names of directories within the logical drives.
Using any of the following methods, select a logical drive (FMHDD1 to
FMHDD5).
• Press directly on the list to select.
• Press a button in the <Partition> group.
• Turn the knob.
Knob Parameter Adjustment
1 Partition Logical drive selection
Press [Backup].
A popup window for confirming file saving appears.
Note
When you save the files, all of the saved files in the logical drive is erased
immediately before the saving operations.
Press [Yes].
This starts the file saving operation. If there is no directory in the logical
drive, a directory is automatically created, and the files are saved within it.
A progress bar and numerical indication appear to show the progress of the
operation.
When the operation is completed, a popup window reading "Completed."
appears.
Press [OK].
Setting values
1 to 5