Executing An Auto Transition; Executing A Transition With The Fader Lever (Manual Transition) - Sony MVS-8000 User Manual

Executing an Auto Transition

To execute a transition on the M/E or PGM/PST bank by a button operation,
use the following procedure in the transition control block.
For an overview of the auto transition, see page 42.
To carry out an instantaneous cut transition: Press the [CUT] button.
To carry out a gradual transition: Press the [AUTO TRANS] button.
This executes the transition at the preset transition rate (see page 298).
While the transition is executing, the [AUTO TRANS] button lights
amber. When it completes the button goes off.
To complete a partially executed transition instantaneously: Press the
[CUT] button.
The [AUTO TRANS] button goes off.
Executing a Transition With the Fader Lever (Manual
Transition)
To execute a manual transition with the transition control block fader lever, use
the following procedure.
For an overview of the manual transition, see page 43.
Fader lever
AUTO TRANS button
CUT button
Transition control block (standard type)
ON ON ON ON
1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
BKBD KEY1 KEY2 KEY3 KEY4
KEY SUPER
MIX NAM
PRIOR MIX
PST
ALL COLOR WIPE DME
MIX
PRIOR NORM TRANS
NORM REV
SET /REV PVW
AUTO
CUT
TRANS
PTN LIMIT
KF
LIMIT SET
305
Executing a Transition