Sony MVS-8000 User Manual page 69

Multi format switcher system
Hide thumbs Also See for MVS-8000:
Table of Contents

Advertisement

Squeeze: The new video appears squeezed over the old video, and
progressively expands to cover it.
(Pattern numbers: 1021 to 1031 (one-channel mode), 2621 to 2628 (two-
channel mode))
Door: The new video moves like a door closing, and progressively covers the
old video.
(Pattern numbers: 1041 to 1044 (one-channel mode))
Flip tumble: The old video rotates about an axis and is replaced by the new
video. During the transition, the signal from the utility 2 bus of the M/E
bank appears as the background.
(Pattern numbers: 1101 to 1102 (one-channel mode))
Page turn: The old video moves like a page turning, and the new video appears
behind it.
(Pattern numbers: 1301 to 1313 (one-channel mode))
Page roll: The new video unrolls like a scroll over the old video. This is a type
of page turn.
(Pattern numbers: 1321 to 1333 (one-channel mode))
Frame in-out: Completed in two transitions. In the first transition, the new
video appears, then on the second transition the new video goes out and the
old video returns.
(Pattern numbers: 1201 to 1204 (one-channel mode))
Picture-in-picture: The one-channel mode and two-channel mode differ as
follows.
In one-channel mode, this completes in two transitions. In the first
transition, the old video shrinks, and the new video appears behind it.
In the second transition, the old video expands again until it is its original
size.
(Pattern number: 1251 (one-channel mode))
In two-channel mode, in the first half of the transition, the old video
shrinks, and the new video appears. In the second half of the transition, the
new video expands, and the old video disappears. You can move the
pattern from the current position by a relative amount. During the
transition, the signal from the utility 2 bus of the M/E bank appears as the
background.
(Pattern numbers: 2651 and 2652 (two-channel mode))
User programmable DME: Using a DME keyframe effect created with a
keyframe operation, this executes a DME wipe.
(Pattern numbers: 1901 to 1999 (one-channel mode), 2901 to 2999 (two-
channel mode))
For details of creating keyframe effects, see "Creating User Programmable
DME Patterns" (page 413).
Notes
• To use the Split, Page Turn, and Page Roll effects on the MVE-8000 requires
the optional MKS-8830M Nonlinear Effect Board.
69
DME Wipes

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ccp-8000 seriesMvs-8000sf

Table of Contents