Sony MVS-8000 User Manual page 381

3
In the <Mix Pattern> group, make one of the following selections.
Wipe: Use the wipe pattern selected for the transition.
Pattern: Use the dedicated pattern.
4
Depending on the selection in step 3, set the following parameters.
• When Wipe is selected
Knob Parameter
1 Size
2 Soft
• When Pattern is selected
Knob Parameter
1 Size
2 Soft
3 Pattern
a) The patterns are the same as for a standard wipe. See the appendix "Wipe Pattern List"
(Volume 2).
If you selected Pattern, you can also carry out the pattern selection by
pressing the [Mix Ptn Select] button in the Matte Adjust menu, to display
the Mix Ptn Select menu. Select any pattern appearing in the Mix Ptn
Select menu (standard wipe patterns 1 to 24) by pressing the appropriate
button, and you can then adjust the following parameters.
Knob Parameter
1 Size
2 Soft
5
If you selected Pattern in step 4, if required, the following modifiers can
be added. After selecting a wipe mix, skip to step 6.
• When turning [Position] on and setting the pattern position
Knob Parameter
1 Position H
2 Position V
a) See page 61.
• When turning [Multi] on and using replications of the same pattern
Adjustment
Pattern size
Edge softness
Adjustment
Pattern size
Edge softness
Pattern number
Adjustment
Pattern size
Edge softness
Adjustment
Horizontal position
Vertical position
Basic Procedure for Wipe Settings
Setting values
0.00 to 100.00
0.00 to 100.00
Setting values
0.00 to 100.00
0.00 to 100.00
a)
1 to 24
Setting values
0.00 to 100.00
0.00 to 100.00
Setting values
a)
–200.00 to +200.00
a)
–200.00 to +200.00
381