Sony MVS-8000 User Manual page 386

4
5
Making a wipe pattern like a Venetian blind (Pairing)
Use the following procedure.
1
2
3
386
Basic Procedure for Wipe Settings
Knob Parameter Adjustment
3 Shift Replication layout
a) See page 64.
To make more adjustments, press the [Multi Adjust] button.
The Multi Adjust menu appears.
Make the following settings, as required.
H Invert: When this is on, alternate tiles are inverted left-to-right.
V Invert: When this is on, alternate tiles are inverted top-to-bottom.
Non-Mask: When this is on, even if the positioner function is used to
move the pattern position, the pattern is always present on the screen.
Position: By adjusting the following parameters, move the pattern position
within the divisions determined in step 3.
Knob Parameter Adjustment
1 Position H Horizontal position of pattern
2 Position V Vertical position of pattern
a) See page 61.
In the M/E-1 > Wipe menu, select HF5 'Main Modify.'
The Main Modify menu appears.
In the <Pairing> group, select the slit direction.
H: Create slits in the horizontal direction.
V: Create slits in the vertical direction.
Set the following parameters.
Knob Parameter Adjustment
1 Width Width of the slits
2 H Offset Spacing in the horizontal direction –100.00 to +100.00
3 V Offset Spacing in the vertical direction
a) See page 64.
Setting values
a)
–100.00 to +100.00
Setting values
a)
–200.00 to +200.00
a)
–200.00 to +200.00
Setting values
1 to 128 (integer)
a)
a)
–100.00 to +100.00