Device Control Block (Trackball) - Sony MVS-8000 User Manual

Device Control Block (Trackball)

The device control block is used for three-
dimensional transform operations using a
a Region selection buttons
The operation mode allocated to the device
control block depends on the selection state
of the region selection buttons.
When the [M/E 1], [M/E 2], [M/E 3], and
[P/P] buttons are selected: This
enables the wipe pattern position
setting (positioner) operation mode in
the device control block. You can
select multiple buttons simultaneously.
When the [USER] button is selected: This
enables pattern position setting used
for color backgrounds.
When the [DME 1] to [DME 8] buttons
are selected: This enables the three-
dimensional transform operation mode
232
Names and Functions of Parts of the Control Panel
5 MENU button
1 Region selection buttons
M/E1 M/E2 M/E3
DME1 DME2 DME3
DME5 DME6 DME7
LOCAL GLB
MENU K1 K2
CB1 CB2
AXIS ASP LOC
LOC PERS SIZE
MAIN SUB FMR1
CLR
SHIFT X
WORK
BUFR
2 Operating buttons
DME, for wipe pattern position setting, and
for VTR operation.
P/P USER DEV
DME4
RUN
DME8
CTRL
SRC TRGT
K3 K4
FM1 FM2
LOC
ROT
XYZ
POS
FMR2
Y Z CTR
4 Z-ring
in the device control block.
Press a button, turning it on, to select a
DME channel. You can select multiple
buttons simultaneously.
The number of valid buttons depends
on the number of DME processor
channels installed.
When the [DEV] button is selected: This
enables the VTR/disk recorder
operation mode in the device control
block. In this state, the [M/E 1] to [M/E
3] buttons, [P/P] button and [DME1] to
[DME8] buttons function as the device
1 to device 12 allocation buttons as
follows.
M/E1 (DEV1): device 1
3 Trackball