Image Processing - Sony MVS-8000 User Manual

Image Processing

Combining the background image and input signal
Use the following procedure.
1
In the Frame Memory menu, select VF2 'Edit' and HF2 'Composite.'
The Composite menu appears.
2
In the status area, select the FM to be assigned. (See page 423.)
3
To select V/K mode, press [V/K Mode], turning it on.
4
Press [Edit Enable], turning it on.
This enables the combining of the background signal (the signal providing
the background for combination) and the input signal (the signal providing
the foreground for combination).
5
To use a color matte signal for the input signal, press [Frgd Color], turning
it on.
Even when pair mode is enabled, you can make separate settings for each
FM.
6
Turn the knobs to adjust the following parameters.
Knob
1
2
3
7
If you turned [Frgd Color] off in step 5, if required press [Input Adjust] to
display the Input Adjust menu, and make the video process (see page 425)
and mask (see page 426) settings for the input signal.
Note
The input signal is lowered by one line, but when you apply a freeze, the
freeze image is returned to the correct position.
8
To set the background signal to black, press [Bkgd Black], turning it on.
Parameter Adjustment
Luminance Luminance
Saturation Saturation
Hue Hue
Setting values
0.00 to 100.00
0.00 to 100.00
359.99 to 0.00
Frame Memory Operations
429