Wipe Action On Images With Side Flags - Sony MVS-8000 User Manual

Input source aspect ratio, auto side flags, and auto crop settings
Aspect ratio 4:3 setting
Set the input signal to aspect ratio 4:3. If set to 16:9, the side flags are disabled.
Auto side flag setting
This function automatically applies side flags when a 4:3 signal is selected in
the cross-point control block.
Auto crop setting
When carrying out a DME wipe, this function automatically crops the image
during transition to 4:3.
Adjusting the width of the side flag area
You can set the left and right sides separately.
For the operation for the above setting, see "Settings for Switcher
Configuration (Config Menu)" in Chapter 16 (Volume 2).
Side flag enable/disable setting
Using the Misc menu or a button operation, you can enable or disable the side
flags for the background bus of each of the M/E-1 to M/E-3 and PGM/PST
banks.
For more details, see "Side Flag Settings" (page 460).
Assigning the side flag function to a cross-point button
To switch the side flags on and off with a button operation, it is first necessary
to assign [SIDE FLAG] to the rightmost cross-point buttons.
For more details, see "Cross-Point Settings (Xpt Assign Menu)" in Chapter 16
(Volume 2).

Wipe Action on Images With Side Flags

When a wipe is carried out on an image with side flags, all wipe patterns can
be used.
The following illustration shows the action in a wipe.
90
Side Flags