Sony MVS-8000 User Manual page 70

• Note that for an independent key transition, only the Slide, Split, Squeeze,
Door, Frame in-out, and user programmable DME patterns are available.
User programmable DME in transition mode
For the transition mode set when creating a keyframe effect for a user
programmable DME pattern, the following can be used.
• Single: single transition mode
• Flip tumble (Flip/Tumble): flip tumble transition mode
• Compress: a type of picture-in-picture, in which the new image is the
background, and the currently visible image shrinks, and then expands to its
original size. (See example in the next item.)
• Dual: dual transition mode
• Two-channel picture-in-picture (2Ch PinP): two-channel picture-in-
picture transition mode
• One-channel picture-in-picture (1Ch PinP): one-channel picture-in-
picture transition mode
• Frame in-out (Frame I/O): frame in-out transition mode. When the first
transition completes, if you move the position of the image, you can move it
both horizontally and vertically.
• Frame in-out H (Frame I/O H): a type of frame in-out mode, which is
specified when creating a transition effect in the horizontal direction.
The image movement is reflected at both the transition start point and end
point. (See page 72.)
The operation is carried out according to DME wipe patterns 1202, 1203, or
1204.
• Frame in-out V (Frame I/O V): a type of frame in-out mode, which is
specified when creating a transition effect in the vertical direction.
The image movement is reflected at both the transition start point and end
point. (See page 73.)
Transition mode "Compress"
The change in the image when the transition mode is set to "Compress" is as
follows, in comparison to the case of "Picture-in-picture."
• Example of the image change in the transition mode "Picture-in-
picture" (one-channel mode)
70
DME Wipes
First stroke Second stroke