Sony MVS-8000 User Manual page 308

Next transition
Keys 1, 2, 3, and 4
• When a transition applies to a combination of more than one of the
• If as a result of an auto transition, for example, the fader lever position does
308
Executing a Transition
Transition direction
On t Off (deletion)
Off t On (insertion)
background and keys 1, 2, 3, and 4, then the transition for all of these must
be in the same direction complying with the above table.
not agree with the signal output, this is a non-sync state (see page 306) and
LEDs light at both end positions of the fader lever travel. Moving the fader
lever does not carry out a transition, but when the fader lever reaches the end
position the non-sync state is released, and it is now possible to carry out the
next transition. If the fader lever is moved in the direction away from the lit
LEDs, this carries out the next transition, over the remaining part of the fader
lever travel.
Fader lever movement
Downward
Upward