Sony MVS-8000 User Manual page 52

Outline
This uses the outline of the original key as the key. You can adjust the width
and density of the outline. You can also enable the separate edge function, and
adjust the top, bottom, left, and right outline widths separately.
Emboss
This applies an embossing effect to the outline of the key. You can adjust the
width and position of the embossing, and the density. You can adjust the
density separately for key fill and key edge. When embossing is on, the Fine
Key and zabton functions go off.
Soft edge
This softens the edge of the key.
Zabton
This inserts a translucent pattern behind a key. You can adjust the pattern size,
softness, density and color.
Edge type and key fill/key source position
The key edge modification function has two modes: a mode ("key drop ON
mode") in which the key fill/key source position moves downward, and a mode
("key drop OFF mode") in which it does not move downward.
Key drop ON mode: The key fill/key source position moves downward by
Key drop OFF mode: The key fill/key source position does not move. When
In the key drop ON mode, a menu setting selects between the mode ("4H
mode") in which the key fill/key source position is lowered by four scan lines,
and the mode ("8H mode") in which the key fill/key source position is lowered
by eight scan lines.
When Fine Key is on, the edge width is forced to the range 0.00 to 4.00.
Note that in the following situations, the key drop mode is forcibly turned on.
• When the edge type is border, outline, or emboss
52
Keys
eight scan lines or four scan lines. When a drop border or shadow is
selected, it is possible to apply a border to the top edge of the key.
a drop border or shadow is selected, it is not possible to apply a border to
the top edge of the key.