Key Modify Clear; Blink Function - Sony MVS-8000 User Manual

Key Modify Clear

Press [Default Recall] at the lower left of the menu display, turning it on, then
press the corresponding VF button (VF1 to VF4) to return the key settings to
their initial status.
For details of menu operations, see "Menu Operations" (page 274).

Blink Function

With the blink function, you can obtain the following effects.
Key blink: The key is alternately inserted and deleted at regular intervals. You
can set the period of blinking, and the proportion of each cycle for which
the key is inserted.
Edge blink: The key fill and key edge fill signals are interchanged at regular
intervals. You can set the period of blinking, and the proportion of each
cycle for which the original state holds.
Using the blink function
For example, to make the required settings for key 1 on the M/E-1 bank, use
the following procedure.
1
In the M/E-1>Key1 menu, select HF6 'Transition.'
The Transition menu appears.
2
In the <Blink> group, select [Key Blink] or [Edge Blink] to set it on.
3
Set the blink parameters.
• When key blink is selected
Knob
1
2
• When edge blink is selected
Knob
1
2
Parameter Adjustment
Blink Rate Length of blink cycle
Duty Proportion of cycle for which key
inserted
Parameter Adjustment
Blink Rate Length of blink cycle
Duty Proportion of cycle for which
original state holds
Setting values
1 to 100
0.00 to 100.00
Setting values
1 to 100
0.00 to 100.00
Key Setting Operations Using Menus
351