Sony MVS-8000 User Manual page 341

Knob
1
2
Note
In the emboss function it is not possible to set [Fine Key] on.
• When the edge type is normal, drop border or shadow, enabling the [Fine
Key] function keeps [Key Drop] on.
• When applying a border to the key edge, enabling the [Fine Key]
function halves the border width setting range.
Carrying out a color mix for the key edge fill matte
When you select 'Matte' for the edge fill of a border, drop border, or shadow,
you can create a combination of color 1 and color 2 using a wipe pattern
generated by the dedicated pattern generator.
Use the following procedure.
1
In the <Edge Fill> group of the Edge menu, select [Matte], then press
[Matte Adjust].
The edge fill Matte Adjust menu appears.
2
In the <Edge Matte> group, select [Mix Color], turning it on.
3
Adjust the following parameters.
Knob
1
2
3
a) The patterns are the same as standard wipes. (For details, see the appendix "Wipe Pattern
List" (Volume 2).)
To select the pattern, display the Mix Pattern Select menu by pressing
[Mix Pattern] in the edge fill Matte Adjust menu. After selecting one of the
patterns (standard wipe patterns 1 to 24) displayed in the Mix Pattern
Select menu, you can adjust the following parameters.
Parameter group [2/2]
Parameter Adjustment
H Phase Key horizontal position
V Phase Key vertical position
Parameter Adjustment
Size Pattern size
Soft Softness of pattern edge
Pattern Pattern number
Setting values
Left edge position
value shown
Top edge position
value shown
Setting values
0.00 to 100.00
0.00 to 100.00
a)
1 to 24
Key Setting Operations Using Menus
341