Sony MVS-8000 User Manual page 425

Notes
• All freeze images written to temporary memory are lost when the system
is powered off.
• If you change the frame memory to use as in step 2 before saving the
freeze images written to temporary memory, all the freeze images in
temporary memory are lost, unless the auto store function has been
enabled in setup. With the auto store function enabled, the freeze images
written to temporary memory are saved automatically when the frame
memory selection is changed.
Saving a freeze image
To save a captured freeze image in a file, use the following procedure in the
Edit>Freeze menu.
1
Press [Store].
The keyboard window (see page 282) appears.
The default file name, "image###" (where ### is a three-digit number) is
input.
2
In the keyboard window, enter the file name (maximum 8 characters).
3
In the keyboard window, press the [Enter] button.
This saves the freeze image as a file in memory.
Note
When the system is powered off, the file saved in memory is erased.
However, you can recall a backed up file in the Frame Memory menu.
For details, see "File Backups" (page 440), and "Restoring backed up
files" (page 441).
Setting video processing
To set video processing for the signal selected on a frame memory source bus,
use the following procedure in the Edit>Freeze menu.
1
In the <Video Process> group, press [Video Process], turning it on.
2
Use the knobs to adjust the following parameters.
Knob
1
2
Parameter Adjustment
Video Gain Overall gain of the video signal
Y Gain Y signal gain
Setting values
–200.00 to +200.00
–200.00 to +200.00
Frame Memory Operations
425