Time Settings - Sony MVS-8000 User Manual

Difference in the effect of a paste operation
Variable duration mode: The copied keyframe is inserted at the specified
Constant duration mode: The copied keyframe is written over the specified
Transition mode
You can use an effect created with keyframes as a DME wipe pattern on the
switcher. In this case, it is necessary to set the transition mode (the way in
which the effect behaves).
For details of the setting, see "User Programmable DME Transition Mode"
(page 413).

Time Settings

Keyframe duration and effect duration
You can determine the execution time of an effect by setting either the
keyframe durations or the effect duration.
Keyframe duration: This is the time from the keyframe to the next keyframe.
Effect duration: This is the total execution time of the effect, from the first
156
Keyframes
position.
position.
You can set this time in the keyframe control block. (See "Time Settings"
in Chapter 13 (Volume 2).)
In constant duration mode (see page 155), it is not possible to change the
keyframe duration setting.
keyframe to the last. You can set this time in the keyframe control block.
(See "Time Settings" in Chapter 13 (Volume 2).)
When you change the effect duration, the keyframe duration for each
keyframe in the effect is automatically recalculated proportionally.
Keyframe duration
Keyframe number
1
Schematic view of keyframe duration and effect duration
2 3
Effect duration
4 5