Sony MVS-8000 User Manual page 160

Item
Wipe/DME Wipe
Wipe
Trans
User1 to User8 menus
The items that can be adjusted depend on the settings in the Setup menu.
For details, see "Overall Control Panel Settings (Config Menu)" in Chapter
16 (Volume 2).
Item
User1 All to User8 All
FM All
FM Src
FM Proc
FM Still Store
Aux
Mon
160
Keyframes
Paths that can be set
Overall path settings for items relating to wipes
and DME wipes are made simultaneously.
Wipe/DME
Wipe All
Wipe Path for wipes
DME Wipe Path for DME wipes
– Transition path for each M/E and P/P bank
Paths that can be set
Overall path settings for the following items for
each "User" are made simultaneously.
Overall path settings for frame memory items
are made simultaneously.
Overall path settings for frame memory source
items are made simultaneously.
FM Src All
FM Src1 Path for frame memory source 1 and video
process
FM Src2 Path for frame memory source 2 and video
process
Overall path settings relating to the signal
processing other than frame memory source
FM Proc All
and frame memory freeze outputs are made
simultaneously.
FM Proc1 Path for frame memory signal processing 1
FM Proc2 Path for frame memory signal processing 2
Overall path settings for frame memory freeze
image output are made simultaneously.
FM Still Store All
FM Still Store 1 to 8 Paths for frame memory freeze image outputs
1 to 8
Overall path settings for AUX buses are made
simultaneously.
Aux All
Aux 1 to 48 Paths for Aux 1 to 48
Overall path settings for monitor buses are
made simultaneously.
Mon All
Mon 1 to 8 Paths for monitor buses 1 to 8