Relation Between Dme Wipes And Other Effects - Sony MVS-8000 User Manual

Multi format switcher system
Hide thumbs Also See for MVS-8000:
Table of Contents

Advertisement

In the case of a user programmable DME pattern in which a border has
already been applied to the effect, the behavior is as follows.
• When the DME wipe border setting is on, only part of the border applied
in the effect is enabled, and that portion can be adjusted.
• When the DME wipe border setting is off, the border applied in the effect
is enabled as is.
Positioner:
• 1031, 1201 to 1204, 1251, 2651, 2652
When one of the above DME wipe pattern numbers is selected, with the
progress of the transition, the center of the pattern automatically moves
from its initially set position toward the center of the image (see page
61). That is to say, the same effect is obtained as in a normal wipe when
the positioner is set to "AUTO CENTER." Again, by using the position
select function, you can move the pattern instantaneously.
• 2651, 2652
When either of the above pattern numbers is selected, you can move the
patterns on the two channels simultaneously by a relative amount from
the current position.
Pattern limit: You can restrict the range of the transition as desired. However,
this is not available for a DME wipe in the independent key transition
control block.
For more details, see "Pattern Limit" (page 301).
Size: This can only be used when one of the following pattern numbers is
selected.
1201 to 1204, 1251, 2651, 2652
You can set the size of the image.
Crop: You can crop the image. It is also possible in 16:9 mode to crop both
sides, to convert the image to a 4:3 aspect ratio. For the execution of a
DME wipe crop transition, you can select from the following three
possibilities.
• Cut
• Last 5%
• Linear
When [Last 5%] is selected, you can select [Release Transition] to be on
or off.

Relation Between DME Wipes and Other Effects

The relations between DME wipes and other effects are as follows.
75
DME Wipes

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ccp-8000 seriesMvs-8000sf

Table of Contents