Sony MVS-8000 User Manual page 61

Multi format switcher system

Hide thumbs Also See for MVS-8000:

Table of Contents

You can move the wipe pattern to any position.

• The parameter H Position controls the horizontal position of the pattern.

A negative value moves the pattern to the left, and a positive value moves the

pattern to the right.

• The parameter V Position controls the vertical position of the pattern.

A negative value moves the pattern down, and a positive value moves the

You can rotate the pattern. There are three rotation modes, as follows.

This carries out a wipe with the pattern in a fixed angle.

The parameter Angle determines the angle of pattern rotation.

A value of –100.00 of the parameter Angle corresponds to one whole turn

counterclockwise; a value of +100.00 corresponds to one whole turn

With a value of 0.00 there is no rotation.

Positioner off

Positioner on

Ccp-8000 series Mvs-8000sf