Downstream Key/Fade-To-Black Control Block - Sony MVS-8000 User Manual

Multi format switcher system
Hide thumbs Also See for MVS-8000:
Table of Contents

Advertisement

Downstream Key/Fade-to-Black Control Block

1 Key delegation
buttons
a Key delegation buttons
Press DSK1 or DSK2, to select the keyer.
While these buttons are held down, you can
select a key source with the cross-point
buttons on the key bus.
Pressing one of these buttons twice in rapid
succession changes its state so that you can
make cross-point selections on the
corresponding key bus in the PGM/PST
bank.
Key delegation button
(double press)
[DSK1]
[DSK2]
a) The key bus selection button [KEY3] in the P/P
cross-point control block goes off.
262
Names and Functions of Parts of the Control Panel
4 Key source name display/key snapshot buttons
3 K-SS button
DSK1
DSK2
K-SS
DSK1
DSK2
ON
ON
AUTO
AUTO
TRANS
TRANS
2 Independent key
transition
6 AUTO button
execution section
Corresponding
key bus
a)
key 1
b)
key 2
5 FTB button
FTB
AUTO
PST
P/P
M/E
M/E
M/E
1
2
3
M/E
M/E
M/E
IK
2K
3K
P/P
DME
DME
V
K
K
7 Preview selection buttons
b) The key bus selection button [KEY4] in the P/P
cross-point control block goes off.
b Independent key transition
execution section
DSK1 ON, DSK2 ON buttons: Press these
to cut in the corresponding downstream
key 1 or 2. When the key is already
inserted, pressing the button cuts it out.
Each button lights red when the
corresponding key is inserted in the
program output (final output from the
switcher), and lights amber at other
times.
AUTO TRANS buttons: The left button
applies to DSK1 and the right button to
DSK2; press these buttons to carry out
an auto transition. The transition
immediately starts, and the button

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ccp-8000 seriesMvs-8000sf

Table of Contents