M2M Cellular Gateway
1.6 Hardware Installation
This chapter describes how to install and configure the hardware
1.6.1 Mount the Unit
The IDG500AM series can be placed on a desktop, or mounted on the wall.
1.6.2 Insert the SIM Card
WARNING: BEFORE INSERTING OR CHANGING THE SIM CARD, PLEASE MAKE SURE THAT POWER OF
THE DEVICE IS SWITCHED OFF.
The SIM card slots are located at the right side of IDG500 series housing in order to protect the SIM
card. You need to unscrew and remove the outer SIM card cover before installing or removing the SIM
card. Please follow the instructions to insert or eject a SIM card. After SIM card is well placed, screw
back the outer SIM card cover.
Step 1:
Loosten the screws as
below and remove
the SIM cover.
Index skipping is used to reserve slots for new function insertion, when required.
Step 2:
Push the SIM card
into the SIM slot 1
or slot 2.
Step 3:
Push the inserted SIM
card again to eject it
from the SIM slot.
11