M2M Cellular Gateway
Item
Value setting
Enable URL
The box is unchecked by
Blocking
default
function
Black List /
Deny those match the
White List (Filter
following rules is set by
Method
default
Selection)
The box is unchecked by
Log Alert
default
Invalid Access
The box is unchecked by
Web Redirection
default
Create/Edit Filter Rules
The router supports up to a maximum of 20 URL blocking rule sets. Ensure that the URL Blocking is
enabled before we can create blocking rules.
When Add button is applied Filter Rule Configuration screen will appear.
Item
Value setting
1. String format can be
Rule Name
any text
2. A Must filled setting
Source IP
A Must filled setting
Index skipping is used to reserve slots for new function insertion, when required.
Description
Check the Enable box to activate this filter function
When Deny those match the following rules is selected, as the name suggest,
packets specified in the rules will be blocked –black listed. In contrast, with Allow
those match the following rules, you can specifically white list the packets to pass
and the rest will be blocked.
Check the Enable box to activate to activate Event Log.
Check the Enable box to activate this function. When the user attempts to open a
blocked http URL by the web browser, it will redirect to a warning page.
Description
Enter a url blocking rule name. Enter a name that is easy for you to understand.
This field is to specify the Source IP address.
Select Any to filter packets coming from any IP addresses.
Select Specific IP Address to filter packets coming from an IP address entered in
this field.
152