M2M Cellular Gateway
the router.
Address Auto‐configuration (summary)
Address Auto‐configuration
Item
Value setting
The box is
Auto‐configuration
unchecked by
default
1. Only can be
selected when Auto‐
Auto‐configuration
configuration
Type
enabled
2. Stateless is
selected by default
Index skipping is used to reserve slots for new function insertion, when required.
Description
Check to enable the Autoconfiguration feature.
Define the selected IPv6 WAN Connection Type to establish the IPv6 connectivity.
Select Stateless to manage the Local Area Network to be SLAAC + RDNSS
Router Advertisement Lifetime (A Must filled setting): Enter the Router
Advertisement Lifetime (in seconds). 200 is setted by default.
Select Stateful to manage the Local Area Network to be Stateful (DHCPv6).
IPv6 Address Range(Start) (A Must filled setting) : Enter the start IPv6 Address for
the DHCPv6 range for your local computers. 0100 is setted by default.
IPv6 Address Range(End) (A Must filled setting): Enter the end IPv6 Address for the
DHCPv6 range for your local computers. 0200 is setted by default.
IPv6 Address Lifetime (A Must filled setting) : Enter the DHCPv6 lifetime for your
local computers. 36000 is setted by default.
86