M2M IDG500AM-0T001 User Manual page 147

M2M Cellular Gateway
Time Schedule
A Must filled setting
The box is unchecked by
Enabling the rule
default.
Save
N/A
Undo
N/A
Back
N/A
Index skipping is used to reserve slots for new function insertion, when required.
known Service is selected, otherwise select User‐defined Service and specify a
port range.
For Protocol, select GRE to filter GRE packets
For Protocol, select ESP to filter ESP packets
For Protocol, select SCTP to filter SCTP packets
For Protocol, select User‐defined to filter packets with specified port number.
Then enter a pot number in Protocol Number box.
Apply Time Schedule to this rule, otherwise leave it as Always.
If the dropdown list is empty ensure Time Schedule is pre‐configured. Refer to
System > Scheduling > Scheduling Setting tab
Click Enable box to activate this rule then save the settings.
Click Save to save the settings
Click Undo to cancel the settings
When the Back button is clicked the screen will return to the Packet Filters
Configuration page.
147