M2M Cellular Gateway
Packet Filter Setting
The packet filter setting allows user to create and customize packet filter policies to allow or reject
specific inbound/outbound packets through the router based on their office setting.
Enabling Packet Filter
Go to Advanced Network > Firewall > Packet Filters Tab
Enabling Packet Filters
Item Name
Value setting
Enable Packet
The box is unchecked by
Filter function
default
Black List /
Deny those match the
White List
following rules is set by
(Filter Method
default
Selection)
The box is unchecked by
Log Alert
default
Save
N/A
Undo
N/A
Note: Packet Filter function is only available when Firewall feature is enabled. Refer to section 4.1
Firewall
Index skipping is used to reserve slots for new function insertion, when required.
Description
Check the Enable box to activate Packet Filter function
When Deny those match the following rules is selected, as the name suggest,
packets specified in the rules will be blocked –black listed. In contrast, with Allow
those match the following rules, you can specifically white list the packets to pass
and the rest will be blocked.
Check the Enable box to activate Event Log.
Click Save to save the settings
Click Undo to cancel the settings
144