M2M Cellular Gateway
1.6 Hardware Installation
This chapter describes how to install and configure the hardware
1.6.1 Mount the Unit
The IDG701 series can be placed on a desktop, mounted on the wall, or mounted on a DIN‐rail. It has
designed with "ears" for attaching to the wall or the inside of a cabinet. The wall‐mount kits and DIN‐
rail bracket are not screwed on the product when out of factory. Please screw the wall‐mount kits and
DIN‐rail bracket on the product first.
1.6.2 Insert the SIM Card
WARNNING: BEFORE INSERTING OR CHANGING THE SIM CARD, PLEASE MAKE SURE THAT POWER OF
THE DEVICE IS SWITCHED OFF.
The SIM card slots are located at the bottom side of IDG701‐0T001 housing in order to protect the SIM
card. You need to unscrew and remove the outer SIM card cover before installing or removing the SIM
card. Please follow the instructions to insert a SIM card. After SIM card is well placed, screw back the
outer SIM card cover.
Step 1:
Follow red arrow to
unlock SIM socket
Index skipping is used to reserve slots for new function insertion, when required.
Step 2:
Lift up SIM holder,
and insert SIM card
Step 3:
Put back SIM holder, and
follow red arrow to lock
SIM socket
12