Table of Contents
Advertisement
M2M Cellular Gateway
applied the "Static Routing Rule Configuration" window will appear to let you define a static
routing rule. The parameters include the destination IP address and subnet mask of dedicated
host/server or subnet, the IP address of peer gateway, the metric and the rule activation.
Configuration
Just check the "Enable" box to activate the "Static Routing" feature.
Static Routing Rule List
The Static Routing Rule List shows the setup parameters of all static routing rule enteries.
There also be one "Add" button at the "Static Routing Rule List" caption, that can let you add
one new static routing rule. While the "Edit" button at the end of each static routing rule can let
you modify the rule.
Static Routing Rule Configuration
To configure one static routing rule, you must specify related parameters including the
destination IP address and subnet mask of dedicated host/server or subnet, the IP address of peer
gateway, the metric and the rule activation. Following diagram is an example.
Static Routing Scenario
Scenario Application Timing
When the administrator of the gateway wants to specify what kinds of packets to be
transferred via which one gateway interface and which peer gateway to their
Index skipping is used to reserve slots for new function insertion, when required.
110
Advertisement
Table of Contents
