M2M Cellular Gateway
Ethernet interface: there are Static IP, Dynamic IP, PPPoE, PPTP and L2TP WAN types.
Static IP Address WAN Type: Settings include WAN IP Address, WAN Subnet Mask, WAN
Gateway, Primary DNS, Secondary DNS, MTU, NAT, Network Monitoring, IGMP and WAN IP
Alias.
Dynamic IP Address WAN Type: Settings include Host Name, ISP registered MAC Address,
Connection Control, Maximum Idle Time, MTU, NAT, Network Monitoring, IGMP and WAN IP
Alias.
PPPoE WAN Type: Settings include IPv6 Dual Stack, PPPoE Account & Password, Primary DNS
/ Secondary DNS, Connection Control, Maximum Idle Time, Service Name / Assigned IP
Address, MTU, NAT, Network Monitoring, IGMP and WAN IP Alias.
PPTP WAN Type: Settings include IP Mode, Server IP / Name, PPTP Account & Password,
Connection ID, Connection Control, Maximum Idle Time, Service Name / Assigned IP Address,
MTU, MPPE, NAT, Network Monitoring, IGMP and WAN IP Alias.
L2TP WAN Type: Settings include IP Mode, Server IP / Name, L2TP Account & Password,
Connection Control, Maximum Idle Time, MTU, MPPE, NAT, Network Monitoring, IGMP and
WAN IP Alias.
3G/4G or USB 3G/4G interface: there is only 3G/4G WAN type.
3G/4G WAN Type: Settings include Dial‐up Profile, APN, PIN Code, Dialed Number, Account
& Password, Authentication, Primary DNS, Secondary DNS, Connection Control, Maximum
Idle Time, Time Schedule, MTU, NAT, Network Monitoring and IGMP.
ADSL interface: there are Ethernet over ATM with NAT, IP over ATM, PPPoE (ADSL), PPP over ATM
and RFC 1483 Bridged WAN types.
Ethernet over ATM with NAT and IP over ATM WAN Types: Settings include IP Mode, Host
Name, ISP Registered MAC Address, Connection Control, MTU, NAT, Data Encapsulation, VPI
Number, VCI Number, Schedule Type, Network Monitoring, IGMP and WAN IP Alias.
PPPoE (ADSL) and PPP over ATM WAN Types: Settings include PPPoE Account & Password,
Primary DNS, Secondary DNS, Connection Control, Service Name, Assigned IP Address, MTU,
Index skipping is used to reserve slots for new function insertion, when required.
69