Table of Contents
Advertisement
M2M Cellular Gateway
Source MAC
A Must filled setting
URL / Domain
Name /
A Must filled setting
Keyword
Time Schedule
A Must filled setting
Enabling the
The box is unchecked by
rule
default.
Save
N/A
Undo
N/A
Back
N/A
Index skipping is used to reserve slots for new function insertion, when required.
Select IP Range to filter packets coming from a specified range of IP address
entered in this field.
Select IP Address‐based Group to filter packets coming from a pre‐defined group
selected. Note: group must be pre‐defined before this selection become available.
Refer to System > Grouping > Host grouping. You may also access to create a group
by the Add Rule shortcut button. Setting done through the Add Rule button will
also appear in the Host grouping setting screen.
This field is to specify the Source MAC address.
Select Any to filter packets coming from any MAC addresses.
Select Specific MAC Address to filter packets coming from a MAC address entered
in this field.
Select MAC Address‐based Group to filter packets coming from a pre‐defined
group selected. Note: group must be pre‐defined before this selection become
available. Refer to System > Grouping > Host grouping. You may also access to
create a group by the Add Rule shortcut button. Setting done through the Add Rule
button will also appear in the Host grouping setting screen.
Specify URL, Domain Name, or Keyword list to filtering rule. It supports up to a
maximum of 10 Keywords in a rule by using the delimiter ";".
In the Black List mode, if the matching rule is found, the packets with http header
will be dropped.
In the White List mode, if the matching rule is found, the packets with http header
will be accepted and other packets with http header will be dropped.
Apply Time Schedule to this rule, otherwise leave it as Always.
If the dropdown list is empty ensure Time Schedule is pre‐configured. Refer to
System > Scheduling setting.
Click Enable box to activate this rule.
Click the Save button to save the configuration
Click the Undo button to restore what you just configured back to the previous
setting. Please note that the restored setting may not be the factory default setting
but a retrieve of what was saved in the memory.
When the Back button is clicked the screen will return to the URL Blocking
Configuration page.
153
Advertisement
Table of Contents
