M2M Cellular Gateway
Configuration Path
Physical Interface
Operation Mode
Line Speed
Ethernet WAN: The gateway has one or more RJ45 WAN ports that can be configured to be WAN
connections. For each Ethernet WAN port, please plug in RJ45 cable from your external DSL modem to
the port and follow UI setting to setup. If the gateway is setup behind a firewall device, plug in RJ45
cable from one Ethernet port of firewall device instead.
3G/4G WAN: The gateway has one or more built‐in 3G/4G
connections. For each built‐in modem, there are 1 or 2 SIM cards to be inserted into the modem, please
insert the SIM card and follow UI setting to setup.
Caution
5 The specification of embedded module depends on respective model.
Index skipping is used to reserve slots for new function insertion, when required.
[Physical Interface]‐[Interface Configuration (WAN‐n)], n=1, 2, ...
Ethernet
Always on
100Mbps
/
100Mbps
WAN Physical Interface
ISP
DSLAM
Cellular Network
Cellular Network
Please MUST POWER OFF the gateway before
you insert or remove SIM card.
The SIM card can be damaged if you insert or
remove SIM card while the gateway is in operation.
3G/4G
USB 3G/4G
Always on
Failover
50Mbps
/
5Mbps / 21Mbps
150Mbps
Firewall
or
xDSL Modem
ISP
DSLAM
5
modems that can be configured to be WAN
ADSL
Always on
2Mbps / 22Mbps
Ethernet WAN
Gateway
3G/4G WAN
Gateway
USB 3G/4G WAN
Gateway
ADSL WAN
Gateway
56