M2M Cellular Gateway
the "OSPF Area List" caption to allow you to add one new OSPF area. The "Edit" button at the
end of each OSPF area definition can let you modify it.
OSPF Area Configuration
To configure one OSPF area, you must specify related parameters including the area subnet, the
area ID and area activation by an "Enable" box. Following diagram is an example for the scenario.
Scenario Application Timing
When the administrator of the gateway wants to deploy one OSPF gateway in a large
enterprise and expects the gateway to learn its routing table by using OSPF protocol
from the enterprise backbone. The OSPF gateway will forward its routing information to
other routers that are under the gateway and not linked to the enterprise backbone.
Scenario Description
The OSPF gateway gathers routing information from the backbone gateways in area 0
by using OSPF dynamic routing protocol.
The OSPF gateway will forward its routing information to other routers that are under
the gateway and not linked to the enterprise backbone.
Parameter Setup Example
Index skipping is used to reserve slots for new function insertion, when required.
117