M2M Cellular Gateway
Scenario Application Timing
When the administrator of the gateway wants to reject some client hosts with specific
MAC addresses in the Intranet to connect to the gateway, he can use the "MAC Control"
function to carry out to reject by defining the black list as shown in above diagram.
Certainly, when the administrator wants to allow only the client hosts with dedicated
MAC addresses to connect to the gateway, he can use the "MAC Control" function by
defining the white list to carry out to meet the requirement. It is contrasting to above
diagram.
Scenario Description
To only reject client hosts with dedicated MAC addresses in the black list to connect to
the gateway and block other hosts that are not defined in the "MAC Control Rule List"
entry.
Parameter Setup Example
Following tables list the parameter configuration as an example for the gateway in
above diagram with "MAC Control" enabling.
Use default value for those parameters that are not mentioned in the tables.
Configuration Path
MAC Control
Black List / White List
Index skipping is used to reserve slots for new function insertion, when required.
[MAC Control]‐[Configuration]
■ Enable
Allow all to pass except those match the following rules.
161