M2M IDG500AM-0T001 User Manual page 272

M2M Cellular Gateway
Configuration Path
Telnet with CLI
Connection Type
 Scenario Operation Procedure
 In above diagram, "Local Admin" or "Remote Admin" can manage the "Gateway" in the
Intranet or Internet. The "Gateway" is the gateway of Network‐A and the subnet of its
Intranet is 10.0.75.0/24. It has the IP address of 10.0.75.2 for LAN interface and 118.18.81.33
for WAN‐1 interface. It serves as a NAT gateway.
 The "Local Admin" in the Intranet uses "Telnet" utility with privileged account to login the
Gateway.
 Or the "Remote Admin" in the Internet uses "SSH" utility with privileged account to login the
Gateway.
 The administrator of the gateway can control the device as like he is in front of the gateway.
The Telnet with CLI setting allows administrator to access this device through the traditional
Telnet program. Before you can telnet (login) to the device, please configure the related settings
and password with care. The password management part allows you to set root password for
logging telnet and SSH.
Go to Advanced Network > System Management > Telnet with CLI
Index skipping is used to reserve slots for new function insertion, when required.
[Telnet with CLI]-[Configuration]
LAN: ■ Enable WAN: ■ Enable
Telnet: Service Port 23 ■ Enable
SSH: Service Port 22 ■ Enable
272