Table of Contents
Advertisement
M2M Cellular Gateway
Configure the gateway as the TCP (Transmission Control Protocol) Client. In TCP Client mode, device
initiates a TCP connection with a TCP server when there is data to transmit. Device disconnects from
the server when the connection is Idle for a specified period. You may also enable full time connection
with the TCP server.
Enable TCP Client Mode Window
Item
Value setting
Operation Mode
A Must filled setting
Always on is set by
Connection Control
default
Connection Idle
1. 0 is set by default
Timeout
2. Range 0 to 60 min.
Alive Check Timeout
0 is set by default
Save
N/A
Specify Remote TCP Server
Index skipping is used to reserve slots for new function insertion, when required.
Description
Select TCP Client.
Choose Always on for a TCP full time connection. Otherwise, choose On‐Demand
to initiate TCP connection only when required to transmit and disconnect at idle
timeout.
Enter the idle time out in minutes.
The idle time out is used to disconnect the TCP connection when idle time
elapsed .
Idle time out is only available when On‐Demand is selected in the Connection
Control field.
Input the time period of alive check timeout. The TCP connection will be
terminated if it doesn't receive response of alive‐check longer than this timeout
setting
Click the Save button to save the configuration
305
Advertisement
Table of Contents
