M2M Cellular Gateway
Create/Edit Filter Rules
The router allows you to customize your packet filtering rules. It supports up to a maximum of 20 filter rule sets.
When Add button is applied Filter Rule Configuration screen will appear.
Create/Edit Filter Rules
Item Name
Value setting
1. String format can be
Rule Name
any text
2. A Must filled setting
From Interface
A Must filled setting
To Interface
A Must filled setting
Index skipping is used to reserve slots for new function insertion, when required.
Description
Enter a packet filter rule name. Enter a name that is easy for you to remember.
Define the selected interface to be the packet‐entering interface of the router. If
the packets to be filtered are coming from LAN to WAN then select LAN for this
field. Or VLAN‐1 to WAN then select VLAN‐1 for this field. Other examples are
VLAN‐1 to VLAN‐2. VLAN‐1 to WAN.
Select Any to filter packets coming into the router from any interfaces.
Please note that two identical interfaces are not accepted by the router. i.e. VLAN‐
1 to VLAN‐1.
Define the selected interface to be the packet‐leaving interface of the router. If the
packets to be filtered are entering from LAN to WAN then select WAN for this
field. Or VLAN‐1 to WAN then select WAN for this field. Other examples are VLAN‐
1 to VLAN‐2. VLAN‐1 to WAN.
Select Any to filter packets leaving the router from any interfaces.
145