M2M IDG500AM-0T001 User Manual page 273

M2M Cellular Gateway
Configuration
Item Value setting
Telnet with CLI 1. The LAN Enable box
2. The WAN Enable
Connection Type 1. The Telnet Enable
2. The SSH Enable box
Save N/A
Undo N/A
Configuration
Item Value setting
root String: no blank
The default password
for telnet is 'm2mamit'.
Save N/A
Undo N/A
Index skipping is used to reserve slots for new function insertion, when required.
Description
Check the Enable box to activate the Telnet with CLI function for connecting from
WAN/LAN interfaces.
is checked by
default.
box is unchecked by
default.
Check the Telnet Enable box to activate telnet service. Check the SSH Enable box to
activate SSH service. You can set which number of Service Port you want to provide
box is checked by
for the corresponding service.
default. By default
Service Port is 23.
is unchecked by
default. By default
Service Port is 22.
Click Save to save the settings
Click Undo to cancel the settings
Description
Type old password and specify new password to change root password.
You are highly recommended to change the default telnet password with yours
before the device is deployed.
Click Save to save the settings
Click Undo to cancel the settings
273