M2M Cellular Gateway
Authentication Configuration Window
Item
Value setting
Key Management
A Must fill setting
Local ID
An optional setting
Remote ID
An optional setting
Manual Proposal Window
Item
Value setting
Outbound SPI
Hexadecimal format
Inbound SPI
Hexadecimal format
1. A Must fill setting
Encryption
2. Hexadecimal
format
1. A Must fill setting
Authentication
2. Hexadecimal
format
Save
N/A
Undo
N/A
Back
N/A
Index skipping is used to reserve slots for new function insertion, when required.
Description
Select Key Management from the dropdown box for this IPSec tunnel.
In this section Manually is the option selected.
For IKE+Pre‐shared Key and IKE+X.509 option, please refer to the table in previous
5 pages where key management is described.
Specify the Local ID for this IPSec tunnel to authenticate.
Select the Key ID for Local ID and enter the Key ID (English alphabet or number).
Specify the Remote ID for this IPSec tunnel to authenticate.
Select Key ID for Remote ID and enter the Key ID (English alphabet or number).
Description
Specify the Outbound SPI for this IPSec tunnel.
Specify the Inbound SPI for this IPSec tunnel.
Specify the Encryption Method and Encryption key
Available encryption methods are DES/3DES/AES128/AES192/AES256
The key length for DES is 16, 3DES is 48, AES128 is 32, AES192 is 48, AES256 is 64.
Note: When AH option in Encapsulation is selected, encryption will not be
available.
Specify the Authentication Method and Authentication key
Available encryptions are None/MD5/SHA1/SHA2‐256
Enter the key string (String length by the method which choose)
The key length for MD5 is 32, SHA1 is 40, SHA2‐256 is 64.
Note: When AH option in Encapsulation Protocol is selected, None option in
Authentication will not be available.
Click Save to save the settings
Click Undo button to cancel the settings
Click Back button to return to the previous page.
201