M2M Cellular Gateway
Create/Edit Digital Input (DI) Profile Rules (DI/DO Support Required)
Setup your Digital Input (DI) Profile rules. It supports up to a maximum of 10 profiles.
When Add button is applied, the Digital Input (DI) Profile Configuration screen will appear.
Digital Input (DI) Profile Configuration
Item
Value setting
DI Profile
1. String format
2. A Must filled setting
Name
ID1 by default
DI Source
Low by default
Normal
Level
Signal
1. Numberic String format
2. A Must filled setting
Active Time
The box is unchecked by
Profile
default.
NA
Save
NA
Undo
Index skipping is used to reserve slots for new function insertion, when required.
Description
Specify the DI Profile Name.
Specify the DI Source. It could be ID1.
Specify the Normal Level. It could be Low or High.
Specify the Signal Active Time. It could be from 1 to 10 seconds.
Click Enable box to activate this profile setting.
Click the Save button to save the configuration
Click the Undo button to restore what you just configured back to the
previous setting. Please note that the restored setting may not be the
factory default setting but a retrieve of what was saved in the memory.
336