M2M IDG500AM-0T001 User Manual page 166

M2M Cellular Gateway
Scenario Application Timing
When the administrator of the gateway wants to block some P2P or Stream applications,
he can use the "Application Filters" function to activate by checking the "Enable" box.
Scenario Description
Applications, by checking the "Enable" box, will be rejected or limited connection
sessions to access the Internet.
Parameter Setup Example
Following tables list the parameter configuration as an example for the gateway in
above diagram with "Application Filters" enabling.
Use default value for those parameters that are not mentioned in the tables.
Configuration Path
Application Filter
Log Alert
Configuration Path
Rule Name
Source IP
P2P Software
Streaming
Rule
Scenario Operation Procedure
In above diagram, the Gateway is the gateway as a NAT router. The subnet of Gateway
is 192.168.123.0/24.
Select IP Range and entry IP Address 192.168.123.200 ‐ 192.168.123.250
Enable the Application filters function and activate "BT(BitTorrent, BitSpirit, BitComet)",
"eDonkey/eMule/Shareaza", "MMS", "RTSP", "PPStream", "PPSLive" and "Qvcd" by
checking the "Enable" box.
Application Filters Setting
The Application Filters setting allows user to create and customize Application Filters policies to
reject packets related to specific applications through the router based on their office setting
Go to Advanced Network > Firewall > Application Filters Tab
Index skipping is used to reserve slots for new function insertion, when required.
[Application Filters]‐[Configuration]
■ Enable
■ Enable
[Application Filters]‐[Application Filter List]
Rule 1
IP Range : 192.168.123.200 ‐ 192.168.123.250
■BT(BitTorrent, BitSpirit, BitComet)
■eDonkey/eMule/Shareaza
■MMS
■RTSP
■PPStream
■PPSLive
■Qvcd
■ Enable
.
166