Table of Contents
Advertisement
M2M Cellular Gateway
Index skipping is used to reserve slots for new function insertion, when required.
DHCP server. Note: Renew button is available when DHCP WAN Type is used and
WAN connection is disconnected.
Release button allows user to force the device to clear its IP address setting to
disconnect from DHCP server. Note: Release button is available when DHCP WAN
Type is used and WAN connection is connected.
Connect button allows user to manually connect the device to the Internet. Note:
Connect button is available when Connection Control in WAN Type setting is set to
Connect Manually (Refer to Edit button in Basic Network > WAN > Internet Setup)
and WAN connection status is disconnected.
Disconnect button allows user to manually disconnect the device from the
Internet. Note: Connect button is available when Connection Control in WAN Type
setting is set to Connect Manually (Refer to Edit button in Basic Network > WAN >
Internet Setup) and WAN connection status is connected.
30
Advertisement
Table of Contents
