M2M Cellular Gateway
Create/Edit Digital Output (DO) Profile Rules (DI/DO Support Required)
Setup your Digital Output (DO) Profile rules. It supports up to a maximum of 10 profiles.
When Add button is applied, the Digital Output (DO) Profile Configuration screen will appear.
Digital Output (DO) Profile Configuration
Item
Value setting
1. String format
DO Profile
2. A Must filled setting
Name
DO Source
ID1 by default
Low by default
Normal
Level
Total Signal
1. Numberic String format
2. A Must filled setting
Period
Repeat &
The box is unchecked by
default.
Counter
1. Numberic String format
Duty Cycle
2. A Must filled setting
The box is unchecked by
Profile
default.
NA
Save
Undo
NA
Index skipping is used to reserve slots for new function insertion, when required.
Description
Specify the DO Profile Name.
Specify the DO Source. It could be ID1.
Specify the Normal Level. It could be Low or High.
Specify the Total Signal Period. It could be from 10 to 10000 milliseconds.
Check the Enable box to activate the repeated Digital Output, and specify
the Repeat times. The Repeat Counter could be from 0 to 9999.
Specify the Duty Cycle for the Digital Output. It could be from 1 to 100 %.
Click Enable box to activate this profile setting.
Click the Save button to save the configuration
Click the Undo button to restore what you just configured back to the
previous setting. Please note that the restored setting may not be the
factory default setting but a retrieve of what was saved in the memory.
337