Table of Contents
Advertisement
M2M Cellular Gateway
Protocol
The box is
MPPE Encryption
unchecked by
default
The box is
NAT before
unchecked by
Tunneling
default
LCP Echo Type
A Must filled setting
Service Port
A Must filled setting
The box is
Tunnel
unchecked by
default
Save
N/A
Undo
N/A
Back
N/A
Index skipping is used to reserve slots for new function insertion, when required.
Click the PAP/CHAP/MS‐CHAP/MS‐CHAP v2
‐>The protocol will be enable which box is click.
When click the Enable box
‐>It will enable MPPE for this L2TP tunnel.
Note_1: If Enable box is be click, Authentication Protocol PAP/CHAP will be not
available.
When click the Enable box
‐>It will enable NAT for this L2TP tunnel.
Specify the LCP Echo Type for this L2TP tunnel.
Select Auto
‐>Auto setting the Interval and Max. Failure Time.
Selected User‐defined
‐>Fill in the Interval and Max. Failure Time for LCP.
Selected Disable
‐>Disable LCP Echo and it will be not availabe.
Specify the Service Port for this L2TP tunnel to use.
When click Enable
It will enable this L2TP tunnel
Click the Save button to save the configuration.
Click the Undo button to recovery the configuration.
Click the Back button to return the last page.
226
Advertisement
Table of Contents
