Table of Contents
Advertisement
M2M Cellular Gateway
All box is unchecked by
Handlers
default.
None by default
Response
Managing
The box is unchecked by
default.
Event
NA
Save
NA
Undo
Index skipping is used to reserve slots for new function insertion, when required.
Specify the related Handlers for the managing event.
Select Power Checkbox and select the handlers you want to specify Power
Handlers;
Select WAN Checkbox and select the handlers you want to specify WAN
Handlers ;
Select LAN&VLAN Checkbox and select the handlers you want to specify
LAN&VLAN Handlers;
Select WiFi Checkbox and select the handlers you want to specify WiFi
Handlers;
Select NAT Checkbox and select the handlers you want to specify NAT
Handlers;
Select Firewall Checkbox and select the handlers you want to specify
Firewall Handlers;
Select System Management Checkbox and select the handlers you want to
specify System Management Handlers;
Select System Related Checkbox and select the handlers you want to
specify System Related Handlers;
Select DO Checkbox and select the profile from Digital Output (DO) Profile
List to specify DO Handlers.
Specify the Response to be taken for the managing event.
Select None to specify no response;
Select DO and select profile from Digital Output (DO) Profile List to specify
the DO Response;
Select SMS to specify the SMS Response;
Select SNMP Trap to specify the SNMP Trap Response;
Select Modbus and select profile from Modbus Definition to specify the
Modbus Response.
Click Enable box to activate this Managing Event setting.
Click the Save button to save the configuration
Click the Undo button to restore what you just configured back to the
previous setting. Please note that the restored setting may not be the
factory default setting but a retrieve of what was saved in the memory.
341
Advertisement
Table of Contents
